Tips and Hints

Aus Peter Fuerholz' Wiki
Zur Navigation springen Zur Suche springen

Things to do after hardware exchange

  1. Put your harddisks into the device again and the plug in the cables
  2. Connect to the device as before: http://n3200
  3. user name and password is set back to default: admin/admin, change it
  4. Update the firmware to the latest version (1.00.01)
  5. Load up your hopefully previously saved settings (file conf.bin)
  6. Your power on/off schedule does not work after this actions. Disable/enable the timer once. DOES THAT HELP??

Using by Windows XP

  • Connect as network drive: \\N3200\NfsShare

Use Printer Server

The N3200 has a print server included: Just connect the printer with a USB cable to the N3200. There is nothing to configure in N3200. (The web administration console just supports to kill pending printing orders.)

Use with Linux

  • Add a new printer as network printer using the Internet-Printing-Protocol (IPP). Use following host: N3200, port: 631. The whole URL should be then: ipp://N3200/printers/usb-printer

Use with Windows 2000